1 LCS-1M (Lighting control station master)
Input voltage: 90-277V
Lighting control for 64 addresses (same address allowed)
Maximum current of connectable load: 15 A (can be increased)
Function to control all subordinate CUs (Control Unit: LCS-1S, RCU-4C, etc.)
Up to 32 CUs can be connected through RS-485 communication
Built-in power (current) measurement function
In case of emergency, such as equipment failure, alternative control is possible with a built-in relay
Connection with network devices such as central control and monitoring systems via Ethernet communication
UNI-485(*1) communication enables connection of 32 program switches and 32 sensors(* UNI-485: A communication method that supplies power and performs RS-485 communication with 2 wires)
Predefined emergency lights are automatically switched on when an emergency signal is received from the fire protection function.
The system must have at least one master unit, such as the LCS-1M or LCS-1ML.
183mm (width) * 137mm (height) * 47mm (depth)
2 LCS-1S (Lighting control station slave)
The external specifications are the same as the LCS-1M, but there is no Ethernet communication function and CU control function.
Units that expand as the number of control units increases or current capacity increases
3 LCS-1ML (Lighting control station master)
Same as LCS-1M, but without CPLC function
155mm(W) * 137mm(H) * 47mm(D)
4 LCS-1M1~
Various models are available depending on the number of addresses, CU, switch, the number of connections, and the presence or absence of current measurement of the load
5 RCU-4C
Controls relays according to the commands of the LCS-1M (LCS-1ML) to control lighting for each circuit connected to the relay.
50A Relay 4ch
AC24V or DC24V
DIN rail mounting
122mm (width) * 95mm (height) * 51mm (depth)
