제품소개

...

Program Switch

...

  • The program switch is connected to the LCS in a daisy chain method and communicates with the UNI-485(*1) communication method. Each circuit of the programmable switch can be assigned a luminaire or relay belonging to four LCSs or RCUs.
  • It is possible to control not only the lighting fixtures of the LCS to which the program switch is connected, but also the lighting fixtures connected to other LCSs.
  • The same luminaire can be set on several different switches.
  • If the lighting status of a luminaire is changed by control from another switch or by interlocking a sensor, the lighting status of the luminaire displayed on all relevant switches is updated automatically.
  • All switches can be controlled with the remote control, and functions not defined in the switch (Scene, Block control) can be used when using the remote control.

    • 1 On/Off switch: the function to turn on/off circuits 1 to 10


  • On/Off control for each circuit defined in each circuit (Button)
  • If necessary, a specific button can be set exclusively for Off control (All Off function)

    • 2 Program switch for dimming and toning


  • Dimming or dimming and toning for 1, 2 or 5 circuits depending on type
  • In the case of 2 circuits, each circuit is controlled by 5 buttons on the left and right.
  • In the case of 5 circuits, select the circuit with the left 5 buttons and control dimming or dimming & toning with the right button.

    • 3 Scene switch


  • Up to 64 (+256) Scenes can be set per Zone, and up to 5 or 10 Scenes can be assigned depending on the switch type.
  • Each scene has a scene number, zone information and fade time defined.
  • In the case of a 5-Button switch, 5 Scenes can be set.
  • In the case of 10 buttons, it is possible not only to assign 10 scenes, but also to define 5 scenes on the left side of the switch and 5 on/off buttons for each group on the right side.

    • 4 VR switch


  • Can be set to the following types
  • 100 steps of dimming and toning

    • Type Left VR Center VR Right VR Note
    VS1 dimming dimming dimming 3circuit dimming
    VS2 dimming dimming toning 2circuit dimming and toning
    VS3 dimming on/off toning 1circuit dimming/toning, 1circuit on/off
    VS4 dimming on/off on/off 1circuit dimming, 2circuit on/off
    VS5 dimming dimming up/down 2circuit dimming , screen up/down
    VS6 dimming toning up/down 1circuit dimming/toning , screen up/down

    5 Multifunctional switch


    • Each time you press the left Encoder SW, you can select group control, scene control, and individual lamp control Sequentially.
    • You can select group number/scene number/lamp number by turning the left encoder SW.
    • If you turn the right encoder SW while the scene is selected, you can set the fade time, and if you press the right encoder SW, the selected scene will be executed.
    • When group control or individual control is selected, turning the right encoder switch enables dimming control, and pressing the right encoder switch turns on/off the corresponding lamp or group.

    6 Touch-type multi-function switch


  • Controls luminaires connected to LCS or RCU-4C
  • Individual control
  • Group control
  • Scene control
  • Communicates with designated LCS-1M via Ethernet
  • Can be mounted on standard square switch boxes
  • Power : AC 100~200V
  • Most functions can be controlled with the remote control
  • Supports all menus and messages in multiple languages (Korean, English, Japanese, Chinese)

    • 7 Remote control


  • Dimming control for up to 64 groups
  • Saves and runs up to 64 scenes
  • Individual dimming control of up to 64 luminaires
  • 8 scenes can be executed directly.
  • 8 groups of direct On/Off control